TB 130

/in /by

5-Section Hydraulic Conveyer with Quick Setup for Rough Terrain

Strong, yet lightweight and easy to control, the Putzmeister Telebelt® TB 130 conveyer has a horizontal reach of 38 m to save you time and labor. The five-section telescoping boom and fully hydraulic conveyor handle concrete slumps up to 305 mm and materials ranging from sand to 100 mm rock. With an outrigger design for quick setup in congested areas and rough terrain, the TB 130 is ideal for projects such as wind farms, dams, bridge decks, and landscaping.

General Information

  • Arms
    5
  • Conveyor Horizontal Reach 
    38.47 m
  • Conveyor Horizontal Reach 
    33.74 m
  • Conveyor Belt Width
    457 mm
  • Feed Conveyor Length
    11.60 m
  • Feed Conveyor Belt Width
    457 mm
  • End Hose – Length
    4.57 m
  • Discharge height from grade 
    20.1 m
  • Discharge height from grade 
    -7.86 m
  • Observed capacity 
    4 m³/min
  • Observed capacity 
    4 m³/min
  • Slewing Range
    360°
  • Horizontal Reach net 
    36.81 m
  • Horizontal Reach net 
    31.99 m
  • Outrigger spread – hydraulically rotate out and down (front-rear)
    8.46/8.84 m
  • Outrigger load: Front-Rear
    166/201 kN
  • Weight
    35 508 kg

LB40

/in /by

SPECIFICATIONS
U.S. Metric
Horizontal Reach (Max at 0 degrees) 129’ 9” 39.56m
Vertical Reach (Max at 30 degrees) 72’ 22.07m
Main and Feeder Rate Capacity at 0 8.40 cu-yd/min; 504 cu-yd/hour 4.47cu-m/min; 268 cu-m/hr
Belt Width Main and Feed 20” 508mm
Boom Type/Sections 5-Section Telescopic
Boom Rotation 360 Degrees
Outrigger Type – Front/Rear Fully Hydraulic / Butterfly
Unfolding Height 16’9″ 5.11m
Outrigger Width – Front 31’3″ 9.52m
Outrigger Width – Rear 32’3” 9.83m
Outrigger Width – Length 33’11” 10.34m
Theoretical Concrete Output at 0 504 cu-yd/hour 268 cu-m/hour

SP 9500

/in /by

SPECIFICATIONS
U.S. Metric
Concrete Output Per Hour (Rod/Piston) 118/ 78 cu yds 90/ 60 cu m
Maximum Pressure on Concrete (Rod/Piston) 2256/3524 psi 156/ 243 bar
Maximum Aggregate Size 2.5 in 64 mm
Concrete Cylinder Diameter 7 in 180 mm
Concrete Cylinder Stroke Length 79 in 2000 mm
Differential Piston/Rod Diameter 5.9 in 150 mm
Outlet Diameter — —
Concrete Valve Type High Pressure Rock™ with Double Shift Cylinders
Shifting Cylinders 2
Max. Pump Strokes Per Minute (Rod/Piston) 30/ 20
Volume Control 0 to Maximum
Hydraulic System Open Loop
Main Hydraulic Pump —
Hydraulic Pressure (Rod/Piston) 5076 psi 350 bar
Hydraulic Tank Capacity — —
Engine Model- CAT Tier 4 F CAT® 18
Diesel Engine Power 630 hp 470 kw
Fuel Tank Capacity 170 gal 643 l
Hopper Capacity 21.5 cu ft 0.6 cu m
Hopper-Height 68 in 1727 mm
Axle Single Standard Job Site
Axle Capacity Rating — —
Tires —
Brakes N/A
Outrigger Legs Hydraulic
Length 26′ 8 m
Width 7′ 7″ 2.3 m
Height 10′ 6″ 3.2 m
Trailer Units Weight 24,250 lbs 11,000 kg
Remote Control Cable Cable-Pump Forward/ Stop/Reverse/E-Stop

SXF 65

/in /by

Truck Mounted Concrete Pump With 5-Section Placing Boom
U.S. Metric
Vertical Reach 210′ 8″ 64.21 m
Horizontal Reach 197′ 6″ 60.2 m
Below Grade Reach w/ Tip Hose 157 ft 47.8 m
Pipeline Diameter 5 in 125 mm
Boom Type / Sections Articulating Overhead Roll & Fold®/ 5
Boom Rotation 370 degrees
Unfolding Height 50′ 2″ 15.3 m
Outrigger Type – Front Super X Outriggers, Fully Hydraulic,
Extension & Jacking
Outrigger Type – Rear Hydraulic Slewing & Jacking
Outrigger Soil Pressure w/o Dunnage (front/rear) 670/585 psi 46/40 bar
Outrigger Soil Pressure w/ Dunnage (front/rear) 170.4/148.6 psi 11.7/10.25 bar
Outrigger Width – Front 38 ft 11.6 m
Outrigger Width – Rear 41 ft 12.5 m
Outrigger Length 46′ 4″ 14.1 m
PUMP SPECIFICATIONS-  2525H-6 120-85 MPS
U.S. Metric
Theor. Concrete Output 213 cu yds/h 162 cu m/h
Max. Pressure on Concrete 1169 psi 81 bar
Max. Strokes Per Minute 22
Max. Aggregate size 2.5 in 63.5 mm
Material Cylinder Diameter 10 in 250 mm
Material Cylinder Stroke 98 in 2500 mm
Differential Cylinder Diameter 4.7 in 120 mm
Maximum Oil Flow 158.5 gal/min 600 l/min
Hydraulic Circuitry Type MPS
Valve Type B Rock

S46

/in /by

Truck Mounted Concrete Pump With 5-Section Placing Boom
U.S. Metric
Vertical Reach 149′ 7″ 45.6 m
Horizontal Reach 136′ 10″ 41.7 m
Below Grade Reach w/ Tip Hose 111′ 33.8 m
Pipeline Diameter 5 in 125 mm
Boom Type / Sections Overhead Roll & Fold®/ 4
Boom Rotation 370 degrees
Unfolding Height 39′ 6″ 12 m
Outrigger Type – Front Super X Outriggers,
Hydraulic Slewing & Jacking
Outrigger Type – Rear Hydraulic Slewing & Jacking
Outrigger Soil Pressure w/o Dunnage (front/rear) 367/353 psi 25.3/24.3 bar
Outrigger Soil Pressure w/ Dunnage (front/rear) 104/100 psi 7.2/6.9 bar
Outrigger Width – Front 27′ 3″ 8.3 m
Outrigger Width – Rear 27′ 3″ 8.3 m
Outrigger Length 29 ft 8.8 m
PUMP SPECIFICATIONS-  2525H-6 120-85 MPS
U.S. Metric
Theor. Concrete Output 213 cu yds/h 163 cu m/h
Max. Pressure on Concrete 1169 psi 81 bar
Max. Strokes Per Minute 22
Max. Aggregate size 2.5 in 63.5 mm
Material Cylinder Diameter 10 in 254 mm
Material Cylinder Stroke 98 in 2500 mm
Differential Cylinder Diameter 4.7 in 120 mm
Maximum Oil Flow 158.5 gal/min 600 l/min
Hydraulic Circuitry Type MPS
Valve Type B Rock

S43

/in /by

Truck Mounted Concrete Pump With 5-Section Placing Boom
U.S. Metric
Vertical Reach 138′ 6″″ 42.3 m
Horizontal Reach 123′ 2″ 37.5 m
Below Grade Reach w/ Tip Hose 96 ft 29.3 m
Pipeline Diameter 5 in 125 mm
Boom Type / Sections RZ 5 Roll & Fold®/ 5
Boom Rotation 730 degrees
Unfolding Height 28′ 4″ 8.6 m
Outrigger Type – Front Super X Outriggers,
Hydraulic Slewing & Jacking
Outrigger Type – Rear Hydraulic Slewing & Jacking
Outrigger Soil Pressure w/o Dunnage (front/rear) 740/420 psi 53.01/28.96 bar
Outrigger Soil Pressure w/ Dunnage (front/rear) 96/96 psi 4.76/4.76 bar
Outrigger Width – Front 26′ 1″ 7.95 m
Outrigger Width – Rear 27′ 3″ 8.31 m
Outrigger Length 27′ 8″ 8.43 m
PUMP SPECIFICATIONS-  Standard-2525H-6 120-85 MPS
U.S. Metric
Theor. Concrete Output 213 cu yds/h 163 cu m/h
Max. Pressure on Concrete 1169 psi 81 bar
Max. Strokes Per Minute 22
Max. Aggregate size 2.5 in 63.5 mm
Material Cylinder Diameter 10 in 254 mm
Material Cylinder Stroke 98 in 2500 mm
Differential Cylinder Diameter 4.7 in 120 mm
Maximum Oil Flow 158.5 gal/min 600 l/min
Hydraulic Circuitry Type MPS
Valve Type B Rock

S 38 X

/in /by

3-Axle/ 4-Axle Cab-over Truck
U.S. Metric
Vertical Reach 122′ 5″ 37.3 m
Horizontal Reach 107 ft 32.6 m
Below Grade Reach w/ Tip Hose 85 ft 25.9 m
Pipeline Diameter 5 in 125 mm
Boom Type / Sections Hyper Extension/ 5
Boom Rotation 730 degrees
Unfolding Height 24′ 3″ 7.4 m
Outrigger Type – Front Super X Outriggers, Fully Hydraulic,
Extension & Jacking
Outrigger Type – Rear Hydraulic Extension & Jacking
Outrigger Soil Pressure w/o Dunnage (front/rear) 626/359 psi 43.2/24.8 bar
Outrigger Soil Pressure w/ Dunnage (front/rear) 78/82 psi 5.4/5.7 bar
Outrigger Width – Front 22′ 10″ 6.9 m
Outrigger Width – Rear 23′ 11″ 7.3 m
Outrigger Length 25′ 1″ 7.6 m
PUMP SPECIFICATIONS-  2525H-6 120/85 MPS with Big Rock™
U.S. Metric
Theor. Concrete Output 213 cu yds/h 163 cu m/h
Max. Pressure on Concrete 1169 psi 81 bar
Max. Strokes Per Minute 22
Max. Aggregate size 2.5 in 63.5 mm
Material Cylinder Diameter 10 in 254 mm
Material Cylinder Stroke 98 in 2500 mm
Differential Cylinder Diameter 4.7 in 120 mm
Maximum Oil Flow 158.5 gal/min 600 l/min
Hydraulic Circuitry Type MPS
Valve Type B Rock
PUMP SPECIFICATIONS-  2023-5 110/75 MPS with M Rock
U.S. Metric
Theor. Concrete Output 179 cu yds/h 137 cu m/h
Max. Pressure on Concrete 1094 psi 75 bar
Max. Strokes Per Minute 27
Max. Aggregate size 2.5 in 63.5 mm
Material Cylinder Diameter 9 in 230 mm
Material Cylinder Stroke 79 in 2000 mm
Differential Cylinder Diameter 4.3 in 110 mm
Maximum Oil Flow 132.1 gal/min 500 l/min
Hydraulic Circuitry Type MPS
Valve Type M Rock

S 32 X

/in /by

 

Pump Specs
Theoretical Concrete Output

208 cu yds/h

159cu m/h
Max. Pressure on Concrete

1007 psi

69bar
Material Cylinder Diameter

9″

230mm
Material Cylinder Stroke

79″

2006
Max. Aggregate Size *

2.5″

63.5mm
Max. Strokes per Minute 32

 

 

 

Technical Specs
Vertical Reach

104′ 11″

31.9 m
Horizontal Reach

91′ 11″

28 m
Below Grade Reach w/Tip hose

67′ 5″

20.5 m
Pipleline Diameter

 5″

125 mm
Boom Type / Sections

Full Articulation, Roll& Fold
Boom Rotation

740 degrees
Unfolding Height

24′ 9″

7.55 m

SPTO 4000

/in /by

SP 9500

/in /by

Specifications:

U.S.
Rod/Piston
Metric
Rod/Piston
Concrete Output Per Hour (cubic yards-cubic meters)
118/78
90/60
Maximum Pressure on Concrete (psi-bar)

2256/3524

156/243
Maximum Aggregate Size (in.-mm)

2.5

64
Pump Cylinder Diameter (in.-mm)

7

180
Differential Cylinder Size (in.-mm)

5.9

150
Pump Cylinder Stroke (in.-mm)

79

2000
Maximum Pump Strokes Per Minute

30/20
Concrete Valve Type

High pressure Rock with Double Shift Cylinders
Outlet Diameter (in.-mm)

 

 
Engine Model – Diesel Tier 4

Cat C18
Engine Power – (horsepower-kilowatt)

630

470
Hopper Capacity (cu. ft, -cu. m)

21.5

.6
Axle

Single Axel Job site only
Outrigger Legs

Hydraulic
Remote Control Cable

Cable-pump Forward/stop/Reverse/E-stop
Length (ft.- in. -m)

26

8

Width (ft.- in. -m)

7-7

2.3
Height (ft.- in. -m)

10-6

3.2
Weight (lbs. -kg)

24250

11000

SP 9000

/in /by

Specifications:

U.S.
Rod/Piston
Metric
Rod/Piston
Concrete Output Per Hour (cubic yards-cubic meters)
149/97
114/74
Maximum Pressure on Concrete (psi-bar)

1827/2855

126/197
Maximum Aggregate Size (in.-mm)

2.5

64
Pump Cylinder Diameter (in.-mm)

8

200
Differential Cylinder Size (in.-mm)

5.9

150
Pump Cylinder Stroke (in.-mm)

79

2000
Maximum Pump Strokes Per Minute

30/20
Concrete Valve Type

High pressure Rock with Double Shift Cylinders
Outlet Diameter (in.-mm)

 

 
Engine Model – Diesel Tier 4

Cat C18
Engine Power – (horsepower-kilowatt)

630

470
Hopper Capacity (cu. ft, -cu. m)

21.5

.6
Axle

Single Axel Job site only
Outrigger Legs

Hydraulic
Remote Control Cable

Cable-pump Forward/stop/Reverse/E-stop
Length (ft.- in. -m)

26

8

Width (ft.- in. -m)

7-7

2.3
Height (ft.- in. -m)

10-6

3.2
Weight (lbs. -kg)

24250

11000

SP 7500

/in /by

Specifications:

U.S.
Rod/Piston
Metric
Rod/Piston
Concrete Output Per Hour (cubic yards-cubic meters)
88/58
67/44
Maximum Pressure on Concrete (psi-bar)

2256/3524

156/243
Maximum Aggregate Size (in.-mm)

2.5

64
Pump Cylinder Diameter (in.-mm)

7

180
Differential Cylinder Size (in.-mm)

5.9

150
Pump Cylinder Stroke (in.-mm)

79

2000
Maximum Pump Strokes Per Minute

22/14
Concrete Valve Type

High pressure Rock with Double Shift Cylinders
Outlet Diameter (in.-mm)

6

150
Engine Model – Diesel Tier 4

Cat C9.3
Engine Power – (horsepower-kilowatt)

400

298
Hopper Capacity (cu. ft, -cu. m)

21.2

.6
Axle

Single Axel Job site only
Outrigger Legs

Hydraulic
Remote Control Cable

Cable-pump Forward/stop/Reverse/E-stop
Length (ft.- in. -m)

24-3

7.4

Width (ft.- in. -m)

7-2

2.2
Height (ft.- in. -m)

9-5

2.9
Weight (lbs. -kg)

20725

9400

SP 7000

/in /by

Specifications:

U.S.
Rod/Piston
Metric
Rod/Piston
Concrete Output Per Hour (cubic yards-cubic meters)
148/97
113/74
Maximum Pressure on Concrete (psi-bar)

1480/2350

102/162
Maximum Aggregate Size (in.-mm)

2.5

64
Pump Cylinder Diameter (in.-mm)

8

200
Differential Cylinder Size (in.-mm)

5.5

140
Pump Cylinder Stroke (in.-mm)

79

2000
Maximum Pump Strokes Per Minute

30/20
Concrete Valve Type

RL Rock
Outlet Diameter (in.-mm)

6

150
Engine Model – Diesel Tier 4

Cat C9.3
Engine Power – (horsepower-kilowatt)

416

310
Hopper Capacity (cu. ft, -cu. m)

21.2

.6
Axle

Single Axel Job site only
Outrigger Legs

Hydraulic
Remote Control Cable

Cable-pump Forward/stop/Reverse/E-stop
Length (ft.- in. -m)

24-3

7.4

Width (ft.- in. -m)

7-2

2.2
Height (ft.- in. -m)

9-5

2.9
Weight (lbs. -kg)

20500

9300

SPTM

/in /by

Foundation contractors and rough terrain applications will
benefit from SPTM track-mounted concrete pumps. For
contractors drilling multiple cast piles, the SPTM is selfpropelled to eliminate a tow vehicle with operator. The twospeed hydraulically powered track system navigates 42%
grades at up to 4.6 mph allowing it to follow drill rigs to
perform concrete pumping of cast-in-place pilings.

Two pump models are currently available with the track
system. SPTM 1250 and SPTM 2000 models offer up to 118
cubic yard output and 1568 psi on the concrete. Both use
the Schwing open loop hydraulic twin cylinder pump kit with
Rock Valve™ that provides low maintenance pumping and
fast cleanup with less water.

The track system and pump functions are combined into
one radio remote control unit. Paddle style-joysticks provide
directional control and Schwing Control Technology (SCT)
provides pump functions and diagnostics through a digital
display. In order to provide self-sufficient operation in remote
areas, the pump is equipped with a 100 gallon water tank and
air compressor.

 

SP 2000

/in /by

Specifications:

SPECIFICATIONS
U.S.
Rod/Piston
Metric
Rod/Piston
Concrete Output Per Hour (cubic yards-cubic meters)
118/91
90/70
Maximum Pressure on Concrete (psi-bar)

870/1566

60/108
Maximum Aggregate Size (in.-mm)

2.5

63.5
Concrete Cylinder Diameter (in.-mm)

8

200
Differential Piston/Rod Diameter (in.-mm)

4.7/3.14

120/80
Maximum Pump Strokes Per Minute

30/23
Concrete Valve Type

M Rock
Hopper Capacity (cubic feet-cubic meters)

21

.6
Engine Power – (horsepower-kilowatt)

173 hp

129.5kW
Axle

Tandem Standard
Outrigger Legs

Hydraulic Standard
Length (in.-mm)

20-1.5

6129

Width (in.-mm)

6-4

1950
Height (in.-mm)

7-11

2167
Trailer Units Weight (pounds-kilograms)

13,050 lbs

5919 kg
Remote Control Cable (feet-meters)

100 ft

SP 1250

/in /by

Specifications:

U.S.
Metric
Concrete Output Per Hour (cubic yards-cubic meters)
95
73
Maximum Pressure on Concrete (psi-bar)

942

65
Maximum Aggregate Size (in.-mm)

1.5

38
Concrete Cylinder Diameter (in.-mm)

7

180
Differential Cylinder Diameter (in.-mm)

3.15/12.16

80/55
Concrete Cylinder Stroke Length (in.-mm)

55

1400
Maximum Pump Strokes Per Minute

34
Main Hydraulic Pump

A11VL0130
Volume Control

0 to Maximum
Concrete Valve Type

Long Rock™
Shifting Cylinders

2
Hydraulic Tank Capacity (gallons-liters)

112

424
Hydraulic System

Open Loop
Hopper-Height (in.-mm)

51

1292
Hopper Capacity (cubic feet-cubic meters)

13

.38
Outlet Diameter (in.-mm)

5

125
Engine Model – Diesel Tier 4

CAT 4.4 173hp/129.5Kw
Circuit Hydraulics

Twin circuit: Accumulator
Engine Power – (horsepower-kilowatt)

 

Fuel Tank Capacity (gallons-liter)

53

200
Axle

Tandem Standard
Axle Capacity Rating (pounds-kilograms)

14000

6350
Tires

ST 215/75 R17.5
Tandem Axle Tires

LT 235/85 R16
Brakes

Electric
Outrigger Legs

Hydraulic Standard
Length (in.-mm)

20-1.5

6129

Width (in.-mm)

6-4

1950
Height (in.-mm)

7-11

2167
Trailer Units Weight (pounds-kilograms)

10600

4808
Remote Control Cable (feet-meters)

100

30.5

S 65 SXF

/in /by
Boom Specification
Boom Specifications U.S. Metric
Pipeline Diameter 5″ 125 mm
Vertical reach 210-9 64.25
Horizontal reach 196-5  59.9 m
Net Horizontal reach 180-1 54.9 m
Unfolding Height 47-7 14.5 m
Section Lengths:
First Section 36-5 11.2 m
Second Section 47-6 14.5 m
Third Section 44-4 13.5 m
Fourth Section 36-8 11.2 m
Fifth Section 33-2 10.1 m
End hose Length 12′ 3.6 m
Specifications are subject to change without prior notice.

 

Pump Specs
Pump Kits

2525H-5
120/85
MPS

 

U.S

Metric
Theor. Concrete Output (cu./yds/hr)

213

162
Max. Pressure on Concrete (psi)

1169 psi

80 bar
Max. Strokes/Min.

22

22
Pump Cylinder Diameter (in.)

10

250 mm
Pump Cylinder Stroke Length (in.)

98

2500 mm
Differential Cylinder Size (in.)

4.7

120 mm
Max. Aggregate size (in.)

2.5

63.5 mm
Specifications are subject to change without prior notice.

S 46 SX

/in /by
Boom Specification
Boom Specifications U.S. Metric
Pipeline Diameter 5″ 125 mm
Vertical reach 149-7 45.6 m
Horizontal reach 136′-10′ 41.7 m
Net Horizontal reach 128-10 38.4 m
Unfolding Height 39-6 12
Section Lengths:
First Section 27.4′ 8.3 m
Second Section 38′ 11.5 m
Third Section 38′ 11.5 m
Tip Section 33-4 10.4 m
Slewing Range 400 deg. 400 deg.
End hose Length 10′ 3 m
Specifications are subject to change without prior notice.

 

Pump Specs
Pump Kits

2525H-6
120/85
MPS

 

U.S.

Metric
Theor. Concrete Output (cu./yds/hr)

213

163 m
Max. Pressure on Concrete (psi)

1169 psi

80 bar
Max. Strokes/Min.

22

22
Pump Cylinder Diameter (in.)

10

254 mm
Pump Cylinder Stroke Length (in.)

98

2500 mm
Differential Cylinder Size (in.)

4.7

120 mm
Max. Aggregate size (in.)

2.5

63.5 mm
Specifications are subject to change without prior notice.

S 43 SX

/in /by
Boom Specification
Boom Specifications U.S. Metric
Pipeline Diameter 5″ 125 mm
Vertical reach 138-6 42.3 m
Horizontal reach 123-2 37.5 m
Net Horizontal reach 114-6 34.9 m
Unfolding Height 28-4 8.6 m
Section Lengths:
First Section 29-5 8 m
Second Section 24-10 7.57 m
Third Section 23-11 7.3 m
Fourth Section 23-10 7.27 m
Fifth Section 22-9 6.94 m 
End hose Length 12′ 3.6 m
Specifications are subject to change without prior notice.

 

Pump Specs
Pump Kits

2025H-6
120/85
MPS

 

U.S.

Metric
Theor. Concrete Output (cu./yds/hr)

213 cu. m

163 m
Max. Pressure on Concrete (psi)

1169psi

80 bar
Max. Strokes/Min.

22

22
Pump Cylinder Diameter (in.)

10

254
Pump Cylinder Stroke Length (in.)

98

2500 mm
Differential Cylinder Size (in.)

4.7

120 mm
Max. Aggregate size (in.)

2.5

63.5 mm
Specifications are subject to change without prior notice.